Category: Dendrochronology

Tree Ring Dating: Dendrochronology at work on your house!

Dummerston Bridge, small

Erica’s uncle, Chris Baisan, is a dendrochronologist working at the timber003, smallUniversity of Arizona.  A combination science and history expert, he has used his science of tree-ring dating, dendrochronology, to help develop the construction histories of older buildings in Southern Vermont and the surrounding states (To see the buildings he has worked on, look here).  I have worked with him several times over the years, learning about the sample-collecting end of this process, and enjoying the thorough and nuanced histories that Chris puts together to synthesize his research with recorded history.

This spring, Chris and I decided to formalize this partnership in order to offer the local (Southern Vermont area) public a chance to utilize Chris’ expertise.  We now offer tree-ring dating of historic structures, a service to folks with older buildings and an interest in developing the historical evidence that lies within the structures.

Here, in Chris’ words, is how the whole thing works:

Basic tree-ring anatomy

Many trees and woody plants in temperate regions produce annual layers of woody tissue commonly referred to as “tree-rings”. Growth layers in the stems of such plants, when viewed in cross section, form a series of concentric rings – thus the name tree-ring. In coniferous species (pine, fir, spruce) the “ring” or layer is made up of light colored “earlywood” or “springwood” terminated with a dark layer of small, thick-walled cells called “latewood” or “summerwood”. Hardwoods also produce growth layers or rings, but the tissue is anatomically and visually different than conifer wood.

pine closeup, small

Growth in woody plants can be thought of as a series of cones stacked one upon another, like a stack of paper cups. Once formed, the tissue is immobile: a nail driven into a tree will remain at the point and height where it was driven while becoming slowly embedded in the tree as the stem adds new layers each year. Most wood cells remain alive for a few months before dying and becoming empty tubes used for the transport of sap or water in the stem. Only a thin outer skin beneath the bark remains alive. This skin is known as the cambium. A radial sample from the center, or pith, of a tree to the bark will contain a complete series of growth layers making it possible to determine the age of the plant at that height. The longest record, and the age of the tree, can only be obtained at the base of the tree. A radius from high up among the branches will yield a shorter record, as it lacks the early layers of growth produced as the young tree was growing to that height.

Basic Dendrochronology

Tree-ring dating of wood samples relies on matching growth patterns in a sample of unknown date with the pattern in a known standard, or “chronology”. Growth patterns useful for dendrochronological dating are produced by yearly variations in climate that favor or disfavor the growth of trees in a region in common with each other. Variations in growth due to events that only affect an individual (death of a neighbor, loss of limbs or top in a storm for instance) are not helpful and may obscure the common “signal” or pattern. In some cases individual variation may prevent successful tree-ring dating of a sample. Tree-ring chronologies are region specific, and often species specific as well. Conditions favoring the growth of oaks in a valley may not be so favorable for spruce on a mountain top.spruce001, smallscar_hemlock001, small

For successful tree-ring dating the following requirements must be met:

(1) Annual layers or “rings” present and identifiable.

(2) Growth pattern due to external factors present and identifiable.

(3) A known standard or tree-ring chronology containing the record of typical growth for the region, species, and period of time in question must be developed or already available for comparison.

(4) Sufficient number of rings present in a sample for the pattern to be uniquely identified as belonging to a particular period of time, based on comparison with the known standard.

Number 4 is variable depending on the strength of the common growth pattern. Generally, 80 to 100 years is desirable at a minimum, and the longer the sequence, the better. Dating chronologies are generally developed by sampling living trees in a region of interest using an increment borer. Growth patterns are compared and averaged together to maximize the common pattern and eliminate individual variability. Tree-ring chronologies have been developed for many species in many temperate regions of the world. Some of these are available through the International Tree-Ring Data Bank maintained by NOAA (the National Oceanic and Atmospheric Administration) and are available on the World Wide Web.

Sampling historical structures to provide tree-ring dates

In order to date the construction of a building with wooden elements the following requirements must be met:

(1) Species used in construction must be suitable for dendrochronological analysis (spruce, hemlock, oak, or ash are some examples)

(2) Local timber must have been used, or the place of origin of the wooden elements must be known. (3) Samples with an intact bark surface must be obtained (these samples document the year and season of harvest). Milling by sawing or shaping with an ax or adz will remove the outer rings from some or all portions of a timber or board. At least some samples from the structure must have the bark edge, or “waney” edge as it is sometimes called, in order to obtain a construction date. The bark edge is smooth, often has a distinctive color, may have galleries created by engraver beetles, and may, or may not have bits of bark remaining.

(4) The samples must have a sufficient number of rings to provide a reliable date.

Additionally:

(5) Local construction practices including typical season of harvest and the length of the milling and storage process known (this appears vary from a few months to two years for 19th century Vermont).(6) Known history of the structure and area should be noted.

(7) In buildings with a history of repair or construction with re-used material the details of construction, milling or shaping, and juxtaposition of timbers should be examined and noted at the time of sampling.

Ideally as many samples as possible should be obtained, each with a large number of rings and the bark edge present, and each a complete cross section of the timber. For a given timber, three samples might be obtained – one from each end to be sure that the maximum number of rings is obtained, and perhaps a third from a point with the bark edge present. Practical considerations will often preclude such through sampling and a single timber. Often a “core” from an in-situ timber removed with a hole saw, with the bark edge present, would be a typical sample. In a well-sampled structure many elements would be sampled, and not all would necessarily have the bark edge present.

 

cores002, small

Since the maximum number of rings is also a criteria, and local procurement of timber often meant harvest from a single or small number of forest stands, the samples from a structure can be integrated to form a more complete unit. Suitable samples might be obtained from a variety of elements including siding boards, rafters, structural timbers, floor or ceiling joists, etc. As tree size is often poorly correlated with tree age, a smaller element may turn out to have a larger number of rings, and thus be more “datable” than a large timber. This is particularly true of spruce, a common construction wood in 19th century New England. A four-inch board may have over one hundred rings, while a large 12 inch square timber may have only forty.

 

To read further on Chris’ process of accessing and using the growth patterns in timbers and beams to research the history of a house or barn, look here.  Other articles, including the fascinating reports on the history of the Guilford Church and the West Brattleboro Apartment Buildings, are available on the Tree Ring Dating page of our website.  Barton_farm_house, small